Pool Screen Repair & Enclosure Restoration in Clermont, FL
Rust on a pool cage usually starts at the screws. Standard steel screws corrode, bleed orange streaks down the frame and onto the deck, and as the hardware weakens, the whole frame holds up less well in strong wind. Every pool cage restoration we do in Clermont replaces those screws with Nylotech fasteners. We also rescreen enclosures, repair torn panels and stain pool decks here. Call 407-250-1838 or request a free estimate.
Get a Free Estimate or call 407-250-1838
Open lots and wind
Clermont has rolling hills, and some homes sit high with open views. If your cage is on a rise or faces open water, storm wind reaches it with nothing to break it up. The wind stretches panels and pulls spline loose, roof panels can tear, and corroded screws, cables and anchors leave the frame weaker against it. On a lot like that, the fasteners deserve a look before the next storm season.
The fasteners and the restoration
Nylotech fasteners resist rust and corrosion far better than standard hardware, and you can have them in bronze or white, whichever matches the frame. Fitting them is one step in a pool cage restoration. We take out the old screen and haul it away, replace the rusted and worn screws, clean the frame, and mask the home and the pool area. A marine-grade, 100% water-borne acrylic coating goes on with a commercial-grade sprayer, then the cage is rescreened. The coating is designed to bond to pre-finished metal and to last roughly 10 years. Our work carries a 2-year workmanship warranty from the completion date, plus a 3-year warranty against blistering and peeling of the coating on the enclosure structure. Phifer screen also carries Phifer’s manufacturer warranty. Restoring a cage takes about two weeks, and it typically comes in about 60% below the price of replacing it.


Lakes and screen choices
If your home is on the Clermont chain of lakes, no-see-um mesh stops the tiny biting insects that come with the water. Moisture also stays on the frame longer near a lake, which is another reason to replace standard screws before they rust through. Most enclosures get standard 18×14 fiberglass. Bronzetone is the one to pair with a bronze frame, and Glas-Shield is available too.
Repairs and rescreening
For a few torn or loose panels, a pool screen repair replaces just those, along with any rusted screws nearby. Small repairs are welcome, with a minimum service charge. Once many panels are faded or brittle, it is better value to rescreen the whole enclosure, which takes about 5 days.
The deck and the frame color
Rust from the screws can stain the deck as well as the frame. Pool deck staining covers faded or stained concrete with a slip-resistant, UV-protective finish. If you are in an HOA community and want a new frame color, ask it first. Recoating in the existing color is usually straightforward. For an application, we write up the color name and the scope of the job.
How it works
- Request a free estimate or call 407-250-1838.
- We inspect the fasteners, frame, screen and coating and recommend a repair, rescreen or restoration.
- We schedule the work. A restoration takes about two weeks.
- We walk the finished enclosure with you.
Finished enclosures are in our project gallery.
Nearby areas
We also serve Winter Garden and Horizon West, Windermere and Davenport, ChampionsGate and Reunion, and Minneola and Groveland.
Frequently asked questions
How can I tell if my screws need replacing?
Look for rust spots around the screw heads and orange streaks running down the frame below them. Checking once or twice a year catches the problem before it stains the deck.
Are Nylotech fasteners available in other colors?
They come in bronze and white, which are also the two most popular frame colors. We match them to the frame at the time of the restoration.
Is the coating brushed on?
No. A commercial-grade sprayer puts the coating on evenly and in the right amount. Brushing, as with oil-based coatings, tends to leave lines and streaks, and spraying avoids them.
How much less does restoration cost than a new cage?
About 60% less in most cases, because the existing aluminum frame stays in place. For a figure on your own cage, send a few photos and expect a remote estimate within 24 hours.
Can my enclosure be restored, or does it need replacing?
Usually it can be restored. The aluminum frame is sound on most cages, and it is the finish, the screen and the fasteners that need attention, which we confirm honestly at the inspection.
Do you serve the rest of Lake County?
Yes. Our Lake County area includes Clermont, Minneola, Groveland, Mount Dora, Tavares, Eustis and Leesburg. If your town is not listed, give us a call and we will let you know.
Should I recoat the frame when I rescreen?
Yes, if the coating is faded or the screws are rusting. The screen has to come off for a rescreen anyway, so that is the efficient moment to restore the frame.
Are you bonded and insured?
Yes. We are fully bonded, and our insurance for general liability and workers’ compensation totals over $1,000,000.
Ready for a like-new enclosure?
Call 407-250-1838 to have the frame and fasteners on your Clermont cage checked.
Get a Free Estimate or call 407-250-1838